Honda Civic 2016-21 Modification Special Rearview Mirrors Cover Carbon Fiber Style

Product name: Reverse mirror cover - Hydrocarbon

Applicable models: 2016 tenth generation Civic

Product material: ABS electroplating

Installation Instructions
1. Simulated installation
Compare the position where the product is to be installed on the car and adjust it to the exact position.
2. Surface treatment
(1) Cleaning
Use a towel dipped in alcohol or clean the car body with clean water at the parts that need to be installed.
(2) Precautions
Before installation, the car body must be kept dry and free of dust, oil, and wax. When the temperature is below 10 degrees, be sure to heat the 3M glue on the car body and the product.
(3) Use of tackifier
Use cotton swabs or paper towels (less than��) Wipe the location to be glued (car body)
(4) Installation
Tear off a corner of the 3M protective film on the back of the product, leaving the film outside so that the product position can be adjusted accurately, then slowly tear off the film and press it.
(5) Safety period
Within 48 hours after the product is installed (the location where the glue is applied), it should not be exposed to water, oil, or large dust.

Note: Please compare before installation. No return or exchange will be accepted after tearing off the red adhesive film on the back